The standard on newer estates at Sippy Downs, Palmview and Peregian Springs. More moving parts than a tilt door, nearly all replaceable.
No obligation. Takes 30 seconds.
Garage Door Repair Sunshine Coast connects the Sunshine Coast and the Sunshine Coast property owners with qualified, connects Sunshine Coast property owners with experienced garage door technicians for sectional doors. Tell us what the door is doing and roughly where you are — coast, plain or range — and we'll match it to someone who works that area. Firm price before anything starts.
Rollers and hinges — every panel joint has both, so there are a lot of small parts each doing a share of the work. Worn rollers are usually the noise people notice before anything fails.
After that, cables and springs, then the bottom bracket, which carries the most load and sits closest to ground-level damp.
Grinding usually means rollers. A rhythmic clunk once per cycle is often a single worn hinge. A bang is a spring. A whine with no movement is a gear set.
None of that replaces an inspection, but describing it accurately gets you a better answer on the phone.
Increasingly common on newer builds and noticeably heavier, which means higher-rated springs and more load through everything. Worth mentioning when you book — the wrong spring rating on a heavy door fails fast.
the Sunshine Coast.
Where this job typically sits. Access is usually a bigger cost driver than size.
| Job | Indicative price | What moves it |
|---|---|---|
| Service call / diagnosis | $90 – $180 | Callout and assessment, usually credited against the repair. |
| Torsion spring replacement | $250 – $600 | Per spring. Two-spring doors are normally done as a pair. |
| Cable replacement | $150 – $350 | Often done with the springs — they wear together. |
| Motor / opener repair | $150 – $450 | Boards, capacitors and gear sets, where parts still exist. |
| New opener supplied and fitted | $450 – $1,200 | Depends on drive type and whether app control is wanted. |
| Roller door repair | $180 – $600 | Curtain, drum, spring or guide work. |
| Off-track / re-alignment | $150 – $400 | Usually a cable failure underneath it. |
| Panel or section replacement | $300 – $900+ | Per panel. Colour-matching a sun-faded door is the variable. |
| Remote or keypad | $60 – $220 | Coding a new handset is often a few minutes. |
| Full door replacement | $1,400 – $4,000+ | Into an existing opening. Sectional, roller or tilt. |
Prices are indicative only. What a job costs depends on the door type, the part, and whether it can be repaired or replaced. You get a firm price before any work starts.
Won't open, won't close, or making a noise it didn't used to make.
The most common failure, and the one job genuinely worth not attempting yourself.
Openers that hum, stall, run without moving the door, or have died entirely.
Curtain, drum, spring and guide work on residential and commercial roller doors.
Scheduled servicing that catches parts before they fail — especially cables.
Doors hanging crooked in the opening, and the cable failures behind them.
Tell us the suburb and the symptom and we'll match it to the right person.
Call 0468 043 698