A door hanging crooked is usually telling you a cable let go. The track is the symptom, not the cause.
No obligation. Takes 30 seconds.
Garage Door Repair Sunshine Coast connects the Sunshine Coast and the Sunshine Coast property owners with qualified, connects Sunshine Coast property owners with experienced garage door technicians for off track & cables. Tell us what the door is doing and roughly where you are — coast, plain or range — and we'll match it to someone who works that area. Firm price before anything starts.
Look at where the gap is. Higher on the left than the right means the left cable has gone. Both sides even but the door jammed halfway usually means a roller has left the track at a join, or a track has been bent by an impact.
That two-second look tells a technician more over the phone than any description of the noise it made.
Do not run the opener again to 'see if it'll go back'. With one cable live and one gone, every cycle drags the door further out of square and starts bending the panels.
A cable job is $150 to $400. A cable job plus two bent panels is a new door. The difference is usually three or four hopeful presses of the remote.
Pull the emergency release so the opener isn't holding anything, then leave the door exactly where it is. Don't try to level it by hand.
If it's stuck open and the garage connects to the house, that's a security issue worth saying on the phone — it changes how quickly someone gets there.
Cables corrode from the inside of the strand where you can't see it. A cable at Alexandra Headland or Golden Beach can look sound and still be at half strength.
It's the single best argument for having cables inspected at a service rather than waiting — it is the one failure that gives no warning at all.
the Sunshine Coast.
Where this job typically sits. Access is usually a bigger cost driver than size.
| Job | Indicative price | What moves it |
|---|---|---|
| Service call / diagnosis | $90 – $180 | Callout and assessment, usually credited against the repair. |
| Torsion spring replacement | $250 – $600 | Per spring. Two-spring doors are normally done as a pair. |
| Cable replacement | $150 – $350 | Often done with the springs — they wear together. |
| Motor / opener repair | $150 – $450 | Boards, capacitors and gear sets, where parts still exist. |
| New opener supplied and fitted | $450 – $1,200 | Depends on drive type and whether app control is wanted. |
| Roller door repair | $180 – $600 | Curtain, drum, spring or guide work. |
| Off-track / re-alignment | $150 – $400 | Usually a cable failure underneath it. |
| Panel or section replacement | $300 – $900+ | Per panel. Colour-matching a sun-faded door is the variable. |
| Remote or keypad | $60 – $220 | Coding a new handset is often a few minutes. |
| Full door replacement | $1,400 – $4,000+ | Into an existing opening. Sectional, roller or tilt. |
Prices are indicative only. What a job costs depends on the door type, the part, and whether it can be repaired or replaced. You get a firm price before any work starts.
Won't open, won't close, or making a noise it didn't used to make.
The most common failure, and the one job genuinely worth not attempting yourself.
Openers that hum, stall, run without moving the door, or have died entirely.
Curtain, drum, spring and guide work on residential and commercial roller doors.
Scheduled servicing that catches parts before they fail — especially cables.
Remotes that have stopped, extra handsets, and keypad entry.
Tell us the suburb and the symptom and we'll match it to the right person.
Call 0468 043 698